Showing posts with label 6. Show all posts
Showing posts with label 6. Show all posts
Saturday, September 6, 2014
TDA1009 Audio Amplifier 2 x 6 W
Description:
Vcc MIN (V)..........9 V
Vcc NOM (V)........14 V
Vcc MAX (V)........24 V
Pout (W)............2 x 6 W
R (Ohm).............4 Ohm
Tip case..............16-DIP+C
Circuit Diagram:
Vcc NOM (V)........14 V
Vcc MAX (V)........24 V
Pout (W)............2 x 6 W
R (Ohm).............4 Ohm
Tip case..............16-DIP+C
Circuit Diagram:
 |
| TDA1009 Circuit Diagram |
Friday, August 29, 2014
6 5W audio power amplifier
This amplifier circuit based on the ic, and the use here is that where ic STK4017 IC has output power of 6.5 watts with the impedance 8Ohm. Minimum required supply voltage and maximum 20Volt 35 Volt DC.Read more
Saturday, August 23, 2014
6 18 Volt audio power amplifier
This time I will post about the audio amplifier based on IC KA2204. In an audio amplifier circuit has a power output that can also be referred to as a low-grade resources that have only 6 Watts output with 4 Ohm impedance. Frequency response 30 Hz to 18 kHz . For the scheme can be seen below.
Read moreFriday, August 22, 2014
6 Steps in Troubleshooting Vehicle Wiring Problems
The following steps will be done to troubleshoot Vehicle wiring problems issues or circuit failures. Note that you just have to be compelled prepare some tools like jumper wire, voltmeter, ohmmeter and probing tools, before do some troubleshooting on your Vehicle wiring problems issues. Here are some steps you have to perform:
* Voltmeter: this a voltage measurement tools. Note, connect the black result in known sensible ground and red result in the positive side of the circuit.
* Ohmmeter: this a circuit’s resistance measurement tools. Note that low or no resistance during a circuit means that sensible continuity.
Read More..
- Verify problems issues
- Verify any connected symptoms. try this by performing operational checks on parts that are in same circuit.
- Analyze the symptoms. Use the wiring diagrams to see what the circuit is doing, where the problems issues possibly is happening and where the diagnosis can continue.
- Isolate problems issues area
- Repair problems issues
- Verify correct operation.
* Voltmeter: this a voltage measurement tools. Note, connect the black result in known sensible ground and red result in the positive side of the circuit.
* Ohmmeter: this a circuit’s resistance measurement tools. Note that low or no resistance during a circuit means that sensible continuity.
Wednesday, August 20, 2014
6 Watt 4 Ohm Amplifier Circuit
This is an audio amplifier circuit based on IC, and IC were used that MPC563 with minimal output 6W, with impedance of 4 Ohm. Supply Voltage Minimum 4 Volt DC and a maximum voltage to 20 Volts DC. See him under this Scheme.
| 6 Watt 4 Ohm Amplifier Circuit |
Sunday, August 17, 2014
1962 Mercury 6 and V8 Meteor Wiring Diagram
Now see the wiring diagram for the 1962 Mercury 6 and V8 Meteor. This schematic will tells us about the wiring system of the 1962 Mercury 6 and V8 Meteor.
Read More..
 |
1962 Mercury 6 and V8 Meteor Wiring Diagram |
Some parts youre gonna see here are like: light switch fuse block, oil pressure gauge, instrument light, direction signal switch, horn button, blower switch, cigar lighter, windshield wiper switch, temperature gauge, ammeter, door switch, etc. See also some colors codes that refer to the different cable color or connections.
Subscribe to:
Posts (Atom)
