Showing posts with label temperature. Show all posts
Showing posts with label temperature. Show all posts

Thursday, October 2, 2014

Temperature Data Logger 4 Channel Four Channel

Heres a temperature data logger circuit, an 8-pin microcontroller based circuit for temperature data logging via the serial port of any computer from between 1 and 4 remote digital temperature sensors, DS1820/DS18S20 made by Dallas.

Features of the Temperature Data Logger are are follow:
  • Provides realtime data via the serial port.
  • Interfaces up to 4 x DS1820 sensors.
  • Accuracy to 0.5 degrees centigrade
  • Fahrenheit scale selected by a jumper
  • No external power required
  • Data stream easily logged & processed.
  • Over 200m distance for each sensor


The sensors of temperature data logger may be located more than 200 yards from the PCB. Just check that the remote VDD is above 4.4Volts. Its recommends 10uF tantalum capacitors be placed across the power supply pins (not supplied) to minimise random errors and possibly get increased range.


Download :
- Circuit Schematic and Parts List
- Sensor Specs DS1820 DS18S20
- Software for Windows and DOS
- Source Code
- Terminal Emulator 
Read More..

Sunday, August 31, 2014

Basic LM35 temperature sensor circuit

 This is basic of workmaship LM35 temperatur sensor, whish is taken from the LM35 spending and boosted again by the amplifier op-amp. High output if the sensor is received by ic LM35 high temperature . You can use the output as driver relay, fan , or other. And if yo want to see modifications LM35 temperature sensor see here.




 
Read More..

Thursday, August 28, 2014

Fan Speed ​​Control for Temperature Wiring diagram Schematic

With this simple schema that you will be able to control the speed of a DC fan according to the temperature measured by a temperature sensor. It is an ideal accessory for your projects that require cooling that are not constant. 

This simple design allows precise speed control of motors, fans, and blowers, proportional to the temperature. An NTC thermistor (R1) is used as temperature sensor. A schema optional was added to remotely monitor the operation of the fan and to allow some kind of indication of the approximate speed by increasing the brightness of an LED.

 Fan Speed ​​Control for Temperature Circuit Diagram

 fan speed ​​control for temperature circuit diagram


The R5 must be configured to allow the engine just starting to run at the desired temperature. Any 6K8 between the NTC thermistor 22K can operate provided that the R2 value is one tenth of the thermistor. R6, R7 and D1 are optional: R7 obligation is adjusted until the LED glow dimly when the engine is just running.

Parts List
R1 15K @ 20 ° C NTC Thermistor (See Notes)
R2 1K5 1/4W Resistor (See Notes)
R3 1K 1/4W Resistor
R4 270R 1/4W Resistor 1/2W
R5 22K Trimpots
R6 680R 1/4W Resistor (Optional, see Notes)
R7 470R Trimpots
C1 100μF 25V Electrolytic Capacitor
LED D1 (Optional, any shape and color, see Notes)
Q1 BC547 45V 100mA NPN Transistor
Q2 BD140 80V 1.5A PNP Transistor
M1 Fan Motor 12V 700mA max.
Read More..