Showing posts with label 20. Show all posts
Showing posts with label 20. Show all posts
Monday, September 8, 2014
LM2005 20 Watt Automotive Power Amplifier
General Description for LM2005:
Features for LM2005:
Wide supply range (8V –18V)
Externally programmable gain
With or without bootstrap
Low distortion
Low noise
High peak current capability
POe20W bridge
High voltage protection
AC and DC output short circuit protection to ground or across load
Thermal protection
Inductive load protection
Accidental open ground protection
Immunity to 40V power supply transients
3§C/W device dissipation
Pin for pin compatible with TDA2005
The LM2005 is a dual high power amplifier, designed to deliver optimum performance and reliability for automotive deliver optimum performance and reliability for automotive vice to deliver 10W/channel into 2X (LM2005T-S), or 20W bridged monaural (LM2005T-M) into 4X, with low distortion.
Features for LM2005:
Wide supply range (8V –18V)
Externally programmable gain
With or without bootstrap
Low distortion
Low noise
High peak current capability
POe20W bridge
High voltage protection
AC and DC output short circuit protection to ground or across load
Thermal protection
Inductive load protection
Accidental open ground protection
Immunity to 40V power supply transients
3§C/W device dissipation
Pin for pin compatible with TDA2005
Circuit diagram for LM2005:
Datasheet for LM2005: Download
 |
| LM2005 20 Watt Automotive Power Amplifier |
Datasheet for LM2005: Download
Thursday, September 4, 2014
LM1875 20 Watt Audio Power Amplifier
To assemble the amplifier 20 watts with IC LM1875 component is not needed much support. 20 watts power amplifier using LM1875 IC in this article using symmetrical power supply. The series of 20 watts audio power amplifier with IC LM1875 can be used as an experiment or first project for the reader, because it is simple and assembly of high success.
| Schematic Amplifier LM1875 |
LM1875 amplifier circuit with the above may result in the strengthening of the voltage up to 27dB for each channel (1 channel 1 IC). Strengthening the voltage can be changed by changing the feedback that is R5 R (on the circuit above using R 22K). But the tension reinforcement can not be less than 20 dB because it can cause oscillation. For the power supply or power supply 20 watts power amplifier rngakaian with lm1875 can use travo 2-3A with CT.
Subscribe to:
Posts (Atom)
